Customzied Cast Tin Bronze Transmission Spare Parts Worm Gear Wheel Set
1) Featuers of Worm Gar Pair Set
A disadvantage is the potential for considerable sliding action, leading to low efficiency. Worm gears can
be considered a species of helical gear, but its helix angle is usually somewhat large (close to 90 degrees)
and its body is usually fairly long in the axial direction, and it is these attributes which give it screw like qualities.
The distinction between a worm and a helical gear is made when at least one tooth persists for a full rotation
around the helix. If this occurs, it is a 'worm', if not, it is a 'helical gear'. A worm may have as few as one tooth.
If that tooth persists for several turns around the helix, the worm will appear, superficially, to have more than
one tooth, but what one in fact sees is the same tooth reappearing at intervals along the length of the worm.
| Products | Worm Gears & Worm Shafts |
| Custom Made | √ |
| Gear Profile Type | Worm Gear |
| Worm Gear manufacturing | Gear Hobbing |
| Worm Shaft Teeth Grinding | √ |
| Module (M) | Custom |
| Number of Teeth (Z) | Custom |
| Pressure Angle (α) | Custom |
| Lead Angle | Custom |
| Worm Shaft Accuracy Grade | ISO 6 Grade |
| Heat Treatment | Carburizing |
| Surface Hardness | 58-62 HRC |
| STEEL CODE GRADES COMPARISON |
| CHINA/GB | ISO | ГΟСТ | ASTM | JIS | DIN |
| 45 | C45E4 | 45 | 1045 | S45C | CK45 |
| 40Cr | 41Cr4 | 40X | 5140 | SCr440 | 41Cr4 |
| 20CrMo | 18CrMo4 | 20ХМ | 4118 | SCM22 | 25CrMo4 |
| 42CrMo | 42CrMo4 | 38XM | 4140 | SCM440 | 42CrMo4 |
| 20CrMnTi | | 18XГT | | SMK22 | |
| 20Cr2Ni4 | | 20X2H4A | | | |
| 20CrNiMo | 20CrNiMo2 | 20XHM | 8720 | SNCM220 | 21NiCrMo2 |
| 40CrNiMoA | | 40XH2MA/
40XHMA | 4340 | SNCM439 | 40NiCrMo6/
36NiCrMo4 |
| 20CrNi2Mo | 20NiCrMo7 | 20XH2MA | 4320 | SNCM420 | |
Product Tags:
|
|
Cast Tin Bronze Worm Shaft And Worm Gear Wheel Set Transmission Spare Parts Images
|
